Home    >   Clothing Labels   >   Iron On Clothing Labels

Medium Iron & Sew Labels

$29.00
pack of 60
+ FREE Post In Aus
47 reviews
These clothing name labels are made of synthetic fabric. They can be used as iron on labels, or can also be ironed & sewed for longer lasting. They can be easily applied to most of the materials, like school uniforms, underwears and socks.
  • Can be ironed & sewed, so it will last longer
  • Round corner-designed to prevent peeling off
  • Machine washable, dryer safe and guaranteed up to 12 months
  • Easy to read - black print on white background
  • The labels are made of synthetic fiber, not cotton. So it won't shrink after washed

Medium size

Actual size - 16 mm x 60mm
Max 2 lines of print
20 characters per line

  • $17 per set of 30
  • $29 per set of 60
  • $40 per set of 90
  • $51 per set of 120

CUSTOMISE YOUR PRODUCTS
1. Select Quantity:
2. Select Font:
3. Enter Name:
Line 1:
Line 2:
Preview:

Reviews

Instructions

These iron & sew labels are sticky on the back for iron on purpose, it might be a little bit hard to get the needle through, so machine sewing is not recommended for this product.

Iron On Instructions:

1. Peel off a label and place it on the garment with name side facing up.
2. Put a piece of quality baking paper supplied over the label.
3. Preheat the dry iron temperature to wool or cotton, press firmly for 10-20 seconds.
4. Repeat as needed to ensure the label is firmly applied and not lifting at any point.
5. Remove the paper after it cools down. Wait for at least 3 hours before washing the garment.

Hand Sewing:

To make the labels ultra durable and removable, use needle and threads to stitch the labels in the garment. Typically, it can be stitched around or on both ends.

Tips:
  • Do not iron the label for too long if not sure. The temperature and amount of time required are subject to the fabric.
  • NEVER put hot iron directly on a label.
  • Use a dry iron. If it's a steam iron, don't put any water, and avoid the steam holes, in order to make sure the heat applies evenly.
  • Make sure the temperature light on the iron is off before apply the second label.
  • Shipping Details

    Ship within Australia:
  • FREE for ordinary post
  • $4.00 for tracking post
  • $9.00 for express post

  • Ship outside Australia:
  • $10.00 sending to global

  • Turnaround:
    Order will be dispatched in 24 hours, unless it is mentioned at the shopping cart page or something unpredictable happens.
    Woven labels will takes about 2 weeks time for production.
    If order includes woven labels and other products, we will split the shipment. The second shipment will be sent by ordinary post.

    Questions & Answers

    • The iron on labels don't stick, what should I do?
      When the iron on labels are applied, there are 3 aspects need to be taken care of: heat, pressure and time. If these are done correctly, the labels should stick well. So please self-check using the below questions if it doesn't stick:
      * What temperature are you using? Increase it and try again.
      * Did you use the flat areas on the bottom of the iron to apply the labels? Some of the irons have lots of holes and indents at the bottom. They won't work as there is no heat or pressure under the holes.
      * Did you wait until the temperature light is off before apply on the second label? After the first label is applied, the temperature of the iron would drop, so you need to wait it to get hot again.
      * Did you use cold water wash?
      * After ironing the face of the label, you can turn the cloth inside out and iron the back of the label in order to make it stay better.
      If you still have issues with it, please contact the customer service for further assistance.